Product ID:SCOTCHCAST 226 ELECTRICAL RESIN, PART B
MSDS Date:10/22/1985
FSC:8040
NIIN:00-962-4368
MSDS Number: BFZJS

3M COMPANY-ELECTRICAL PRODUCTS DIVISION

3M CENTER
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Cage: 75037

MINNESOTA MINING AND MFG CO ELECTRICAL PRODUCTS DIV

AUSTIN, TX 78769-2963 US

Telephone: 512-984-1800

Cage: 75037

CASTOR OIL (WT% RANGE 95-99%)

CAS: 8001-79-4

RTECS: FI4100000

Fraction By Weight: 97%

CARBODIIMIDE DERIVATIVE (WT% RANGE 1-3%)

Fraction By Weight: 2%

BLACK DYE (WT% RANGE 0.1-1%)

Fraction By Weight: 1%.

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:POSSIBLY CAUSE SENSITIZATION OR
ALLERGIC REACTIONS.
Effects of Overexposure:PART B- EYE: POSS MODERATE EYE IRRITATION.
SKIN: IRRITATION, SENSITIZATION. INHALATION: NO EFFECTS EXPECTED.
INGESTION: MAY BE CATHARTIC.
Medical Cond Aggravated by Exposure:ANY PRE-EXISTING SENSITIVITY OR
ALLERGIC CONDITION.

First Aid:EYE: FLUSH 10 MINUTES W/AMPLE WATER. SKIN: REMOVE
CONTAMINATED CLOTHING & WASH BEFORE REUSE. WASH SKIN W/SOAP &
WATER. INHALE: REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESP OR OXYGEN
AS REQUIRED. INGESTIO N: GIVE TWO GLASSES WATER IF CONSCIOUS.DO NOT
INDUCE VOMITING. CALL PHYSICIAN ALL CASES IMMEDIATELY.

Flash Point Method:CC
Flash Point:>400F/204C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE SCBA PP MODE. DURING FIRE,VAPORS ARE
IRRITATING & HIGHLY TOXIC.
Unusual Fire/Explosion Hazard:ABOVE 400F, PRESSURE BUILDUP IN CLOSED
CONTAINERS CAN CAUSE EXPLOSION.

Spill Release Procedures:FOLLOW ALL PRECAUTIONS GIVEN. WEAR SCBA PP
MODE & BODY PROTECTION. COLLECT NEUTRALIZED SPILL W/ABSORBENT AND
PLACE IN CLOSABLE CONTAINER.

Handling and Storage Precautions:USE ONLY IN WELL VENTILATED AREAS.
AVOID EXCESS HEAT, IGNITION SOURCES. KEEP CONTAINERS CLOSED, STORE
IN COOL DRY AREA. AVOID ALL MOISTURE & H2O VAPOR
Other Precautions:DO NOT INHALE OR INGEST. AVOID EYE,SKIN CONTACT. USE
SAF OR SCBA RESPIRATOR PP MODE IF LOCAL EXHAUST NOT AVAILABLE.

Respiratory Protection:SUPPLIED AIR (PP MODE) RESP W/FULL FACEPIECE; OR
SELF-CONTAINED BREATHING APPARATUS, PP MODE.
Ventilation:LOCAL EXHAUST FOR MIX, USE & CURE AREAS.
Protective Gloves:IMPERVIOUS: RUBBER OR PVA
Eye Protection:CHEMICAL GOGGLES, FULL FACE SHIELD.
Other Protective Equipment:NONE
Supplemental Safety and Health
PART B OF TWO-PART KIT. UPDATE PER 3M MSDS DOC# 10-2588-1 DATED
22OCT85. 3M GENERIC ID# S ARE 80-180-040X-X QNE 80-1300-XXXX-X.
KEY1:N1.

HCC:N1
Vapor Pres:NEG
Vapor Density:8.5
Spec Gravity:0.96
Viscosity:750 CPS
Solubility in Water:NEG
Appearance and Odor:BLACK LIQUID
Percent Volatiles by Volume:LOW

Stability Indicator/Materials to Avoid:YES
WATER, AMINES, STRONG BASES, ALCOHOLS.
Stability Condition to Avoid:EXCESS HEAT, IGNITION SOURCES.
Hazardous Decomposition Products:CARBON & NITROGEN OXIDES, TRACES
HYDROGEN CYANIDE, DIPHENYLMETHANE DIISOCYANATE.

Waste Disposal Methods:LANDFILL OR INCINERATE IAW ALL LAWS &
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.